Teixeira Tech KTM Steering Flag and KTM XC and
Teixeira Tech is proud to introduce their
newly developed steering flag for the KTM XC and
SX quad. It is an innovative, one of a
kind design as they try to stay at the forefront
of suspension development for ATV’s.
Teixeira Tech has taken their extensive
knowledge and developed a flag that reduces the
excessive bump steer on all KTM ATV models by
50% at 11 inches of travel. The steering
flag starts at $94.00 without steering
stabilizer mount. An OEM steering
stabilizer mount is available for an additional
They have also finished up testing on their new
XC and MX a-arms for the KTM XC. Both of these
sets are designed to work with stock shocks.
These a-arms correct the shock mount location on
the a-arms. The stock shocks bottom out way too
early. By doing this, they have gained
additional travel. According to Teixeira Tech’s
specs, the stock KTM XC quad has about 9 1/2
inches of vertical travel. Everything
needed is included except for the lower ball
joints. You must re-use the oem ball joints.
They are camber and caster adjustable using
Teixeira Tech’s new innovative camber/castor
adjustment system. A-arms start at $945.00
for complete kit (without lower ball joint).
Needle Bearing upgrade is available for $100.00.
The XC A-arms bring you up to just under 10
1/2 inches of travel. These a-arms are the
Ground Clearance type and stock width.
Uppers & Lowers are available as individual
The MX A-arms bring you to just over 10 1/2
inches of travel. They are also the Ground
Clearance type. Your front end will be just over
49 1/2 inches wide with this kit with the stock
wheels and tires.
Check out new products and more at
www.teixeiratech.com, or call for details: