NEW YAMALUBE® FUEL STABILIZER & CONDITIONER PLUS
PROTECTS E-10 FUELS FROM DAMAGING OXIDATION AND
FORMULA KEEPS FUEL FRESH, POTENT AND GUM FREE
May 4, 2010 - KENNESAW, GA - The gas you put
in your motorcycle or ATV fuel tank begins to go
bad as soon as it leaves the nozzle. This is
especially true for E-10 fuels that absorb
moisture from the air. If enough water is
present, either from condensation or
contaminated fuel, E-10 will separate into a top
layer which is almost all gasoline, and a bottom
layer which is almost all ethanol (up to 75%)
and water. This separation will make your
motorcycle difficult, if not impossible, to
To protect your fuel system from the damaging
effects of oxidation and phase separation,
Yamalube® is introducing Fuel Stabilizer &
Conditioner Plus, an inexpensive solution that
protects motorcycles from the costly affects
caused by bad fuel.
Yamalube® Fuel Stabilizer & Conditioner Plus
is a proprietary formulation that will keep fuel
fresh, potent and free from gum and varnish.
Metal filmers in this exclusive formula protect
your motorcycle engine from the harmful effects
of E-10 fuel and the destructive sulfate salts
that corrode metal components in the fuel system
and clog fuel filters. Yamalube® Fuel Stabilizer
& Conditioner Plus is the only fuel stabilizer
and conditioner today that delivers this high
level of protection.
Yamalube® Fuel Stabilizer and Conditioner
Plus is available at Yamaha dealers nationwide.
Retail price: $5.38 12 oz., $13.81 32 oz.
(Recommended continuous use mixture is 1 oz. of
Fuel Stabilizer & Conditioner Plus to every 3
gal. of fuel.)
About Yamalube® Products
Yamalube® brand engine oils,
lubricants, and care products are distributed by
Yamaha Parts and Accessories Group, a division
of Yamaha Motor Corporation, U.S.A.
Headquartered in Kennesaw, Georgia. The Yamalube®
Group is responsible for the sales, marketing
and distribution of Yamalube® brand products in
the United States. For more information, visit