|
NEW AFTERMARKET YAMAHA RHINO 660 AND YAMAHA
RAPTOR 660 CYLINDER STUD KITS
Phoenix, Arizona -
KMS Performance has designed and produced a
replacement to the oem cylinder head and case
bolts. Stop the head gasket failures and cracked
cases! Stop using low grade materials that
stretch. These replacement KMS studs are
made of upgraded quality material for a low cost
price.
“We have replaced numerous stock and 686 head
gaskets because of oem bolt failure. I am always
looking to improve our engine packages and
replacing oem parts with quality aftermarket
products only makes sense. We now use these
bolts in all our race motors and have had rave
reviews on their performance.” Quote from Kelly
McLean, owner KMS Performance.
There are 2 kits available for the Rhino 660
and Raptor 660. There is also a cylinder head
kit available for the Raptor 700.
Custom designed CYLINDER STUDS using the best
materials available.
RHINO/RAPTOR 660 CYLINDER TO HEAD STUD KIT:
- INCREASED TORQUE FROM 27LB TO 40 LB
- ALLEN HEAD FOR EASY REMOVAL AND
INSTALLATION
- NO DRILLING OR TAPPING REQUIRED
- REPLACES ALL 6 STOCK BOLTS
- COST EFFECTIVE UPGRADE
- USED IN ALL KMS RACE ENGINES
REINFORCE YOUR CASES!! The area where the
cylinder bolts to the cases is thin and weak,
PRONE to CRACKING. These STUDS integrate (bottom
out) with the cases allowing for maximum
strength.
RHINO /
RAPTOR 660 CYLINDER TO CASE STUD KIT:
- INCREASED TORQUE FROM 30LB TO 40 LB
- LESS HARDWARE FATIGUE
- NO DRILLING OR TAPPING REQUIRED
- REPLACES ALL 4 STOCK BOLTS
- COST EFFECTIVE UPGRADE
- USED IN ALL KMS RACE ENGINES
Rhino/Raptor 660 Cylinder to Head Stud Kit
Retails for $119, Cylinder to Case Stud Kit
Retails for $75. Dealers Welcome. These can be
purchased directly through KMS Performance at
602-442-4340, or on ebay at
http://stores.ebay.com/kms-performance or
via paypal.com
For more information on other products from
KMS Performance, please visit their web site at
www.kmsperformance.com or call them at
1-602-442-4340.
About KMS Performance
KMS offers additional performance products
for the Yamaha Rhino including, intakes, exhaust
and clutch upgrades, as well as paddle tires,
parts and accessories. KMS Performance has been
specializing in high performance ATV’s for over
7 years and offers customized upgrades for their
customers on most 4-stroke ATV’s & UTV’s,
including engine mods, nitrous kits and more.
|
