|
Teixeira Tech KTM Steering Flag and KTM XC and
MX A-Arms
Teixeira Tech is proud to introduce their
newly developed steering flag for the KTM XC and
SX quad. It is an innovative, one of a
kind design as they try to stay at the forefront
of suspension development for ATV’s.
Teixeira Tech has taken their extensive
knowledge and developed a flag that reduces the
excessive bump steer on all KTM ATV models by
50% at 11 inches of travel. The steering
flag starts at $94.00 without steering
stabilizer mount. An OEM steering
stabilizer mount is available for an additional
$10.00.
They have also finished up testing on their new
XC and MX a-arms for the KTM XC. Both of these
sets are designed to work with stock shocks.
These a-arms correct the shock mount location on
the a-arms. The stock shocks bottom out way too
early. By doing this, they have gained
additional travel. According to Teixeira Tech’s
specs, the stock KTM XC quad has about 9 1/2
inches of vertical travel. Everything
needed is included except for the lower ball
joints. You must re-use the oem ball joints.
They are camber and caster adjustable using
Teixeira Tech’s new innovative camber/castor
adjustment system. A-arms start at $945.00
for complete kit (without lower ball joint).
Needle Bearing upgrade is available for $100.00.
The XC A-arms bring you up to just under 10
1/2 inches of travel. These a-arms are the
Ground Clearance type and stock width.
Uppers & Lowers are available as individual
kits.
The MX A-arms bring you to just over 10 1/2
inches of travel. They are also the Ground
Clearance type. Your front end will be just over
49 1/2 inches wide with this kit with the stock
wheels and tires.
Check out new products and more at
www.teixeiratech.com, or call for details:
(209) 833-9160.
|
