Roll Design Dustin
Nelson Podiums again at WORCS ATV round #3 -
Fallbrook CA 3/4/2011 – Dustin Nelson #94,
gains valuable championship points with his 3rd
place finish in Lake Havasu. With three
rounds completed of the 9 round series, Nelson
is only 5 points back from the 2010 champion
Josh Frederick, and 7 points ahead of the 2009
champion Beau Baron.
Lake Havasu course of the WORCS ATV series is
known as one of the most brutal courses of the
year. The track is small, technical, and
challenging, but more physical as there is no
place to rest from the extreme pounding on the
body from the relentless whoops throughout the
course. As the saying goes, “No one can
win the series at this place, but you can sure
lose it here.”
Nelson aboard his Yamaha/Roll Design/Elka
YFZ450R would get a great start and quickly fall
into the 3rd spot behind the Can-Am rider’s Josh
Frederick and Jeremie Warnia. Nelson would
chase the Can-Am for the entire race, but the
rough, single line track made it extremely
difficult to pass and after 30 minutes the
leaders would start to catch lap traffic making
it impossible to make any time up to the
leaders. Nelson would put in an impressive
run securing the 3rd Spot on the podium under
extremely difficult track conditions.
The Production A Class at Havasu saw 32 amateur
riders on the gate. Many of which,
got their setups tuned and dialed in for the
race at the trackside Elka Service Center rig.
Erik Westergaard and Doug Roll were working the
midnight oil helping out the Amateurs.
“Roll Design had a great day here at Havasu with
7 of the Top 9 Production A positions, with
Keith Johnson winning the class” –Said Erik.
Julie Russell MCR/Roll Design/ Elka Suspension
would once again dominate the women’s A class
taking home the 1st place trophy and adding more
points to retain her #1 Plate for 2011.
WORCS heads to Cahuilla Creek MX in Anza
California, April 22-24. Be sure to come
out and see all the great racing before the
series head north for the summer.
About ROLL DESIGN
Roll Design manufacturers high-end
suspension and handling components for ATV’s. Doug
Roll started the company in 1988 with the idea to
build the best ATV off-road racing suspensions on
the market. After 22 years, Roll Design control
arms and steering shafts have won more off-road
races, in the toughest conditions such as the Baja
and Dakar than any other ATV suspension manufacturer
in existence. Roll Design products are 100%
made in the USA in Fallbrook, CA with the highest
quality standards and components available in the
industry. Roll Design is also a USA Factory
Authorized Service Center for Elka Suspension.